Your house is finished. It can still become intelligent.
No channels in the walls, no dust, no month of works. We design an automation system on top of the installation you already have, using wireless technologies chosen for your building rather than for a catalogue.
Nothing gets rewired
Devices go where they are needed — behind a switch, inside a ceiling box, on a rail in the cabinet. Your walls, your finishes and your furniture stay exactly as they are.
One room at a time, if you prefer
You do not have to do the whole house at once. We design the complete picture first, then you can build it up in stages — and because the design came first, the stages fit together instead of fighting each other.
The same result
The same single app, the same voice control, the same scenes and automations as a wired installation. The technology underneath differs; what you see and use does not.
We can open the garage of a shared building — without touching its installation
This is the one everybody assumes is impossible. The garage door of a block of flats belongs to the community: you cannot rewire it, you will not get a hundred neighbours to agree, and no installer wants to touch it. We do not need to touch it.
Your own remote, pressed for you
We keep the remote control you already carry and add a small mechanism that presses its button the moment you tap your phone. The community's motor, receiver and wiring are never altered — nothing in the shared installation changes, so nobody's permission is required.
Or it opens as you arrive
The system recognises your car coming home and asks whether to open. One confirmation from you and the door lifts — so it can never open by itself because a neighbour, a visitor or a passing phone happened to be nearby.
The same approach works for gates, barriers and communal entrance doors. If it has a remote you already carry, we can put it in your phone.
Everything, in one place
One app on your phone. One sentence spoken out loud. The building does the rest.
And the rest of the house:
Talk to your house the way you would talk to a person
You should not have to learn a command list. You say what you want, an assistant works out what that means for this building, and the house does it — lights, blinds, temperature, music, alarm, all at once if that is what the moment needs.
- "It is too bright in here" — the right lights dim, the blind comes down
- "We are going to bed" — the house shuts down and arms itself
- "Is the garage closed?" — it answers, and closes it if not
Tell us about your building
A few questions about your floors and rooms, and what you would like to be able to do. It takes about three minutes, it is free, and it commits you to nothing.
No technical knowledge needed. We never ask you to choose a technology — that is our decision to make.